控制阀的标准有很多，下面我们依次为大家介绍以下控制阀标准汇总
| 标准编号 | 标准中文名称 | 标准英文名称 |
| ANSI/FCI 91-1-1997 | 控制阀门密封的质量标准 | (Standard for Qualification of Control Valve Stem Seals) |
| ANSI/UL 753-1996 | 消防装置用自动供水控制阀的警报附件 | (Alarm Accessories for Automatic Water-Supply Control Valves for Fire-Protection Service) |
| BS EN 60534-2-5-2003 | 工业过程控制阀.流通能力.通过有段间恢复功能的多段控制阀的流体流量的校准公式 | (Industrial-process control valves - Flow capacity - Sizing equations for fluid flow through multistage control valves with interstage recovery) |
| ASTM F 1985-1999 | 气力操作的球形控制阀标准规范 | (Standard Specification for Pneumatic-Operated, Globe-Syle, Control Valves) |
| BS EN 60534-3-2-2001 | 工业过程控制阀.尺寸.蝶形阀除外的转式控制阀的端面距 | (Industrial-process control valves - Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves) |
| BS ISO 15407-2-2003 | 气压传动.五气口方向控制阀,规格18mm和26mm.有任选电接头的安装接口 | (Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Mounting interface surfaces with optional electrical connector) |
| BS ISO 12238-2001 | 气压液动.方向控制阀门.转换时间的测量 | (Pneumatic fluid power - Directional control valves - Measurement of shifting time) |
| BS ISO 5599-1-2001 | 气压液动.五通方向控制阀.不带电连接器的安装接口表面 | (Pneumatic fluid power - Five-port directional control valves - Mounting interface surfaces without electrical connector) |
| BS ISO 5599-2-2001 | 气压液动.五通方向控制阀.任选电气连接器的安装接口面 | (Pneumatic fluid power - Five-port directional control valves - Mounting interface surfaces with optional electrical connector) |
| BS EN 60534-6-2-2001 | 工业过程控制阀.定位器装到控制阀的安装细则.旋转传动装置上安装的定位器 | (Industrial-process control valves - Mounting details for attachment of positioners to control valves - Positioner mounting on rotary actuators) |
| BS EN 1074-5-2001 | 供水阀门.适用性和专用要求的试验.控制阀门 | (Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Control valves) |
| BS EN 60534-8-3-2000 | 工业流程控制阀.噪声问题.控制阀的空气动力噪声预报法 | (Industrial-process control valves - Noise considerations - Control valve aerodynamic noise prediction method) |
| BS EN 60534-2-3-1998 | 工业过程控制阀.流量.试验程序 | (Industrial-process control valves - Flow capacity - Test procedures) |
| BS EN 60534-8-1-2001 | 工业过程控制阀.噪声问题.通过控制阀的动力噪声的实验室测量 | (Industrial-process control valves - Noise considerations - Laboratory measurement of noise generated by aerodynamic flow through control valves) |
| BS EN 60534-3-1-2000 | 工业过程控制阀.尺寸.带法兰的两路、球型、直立式控制阀门的面对面尺寸和带法兰的两路、球型、角度控制阀门 | (Industrial-process control valves - Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle patter) |
| BS EN 1349-2000 | 工业处理控制阀门 | (Industrial process control valves) |
| BS ISO 15407-1-2000 | 18mm和26mm五气口气动方向控制阀.无电插头的安装界面 | (Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Mounting interface surfaces without electrical connector) |
| BS ISO 11727-1999 | 气动流体力学.控制阀和其它元件的控制机械装置和气门的识别 | (Pneumatic fluid power - Identification of ports and control mechanisms of control valves and other components) |
| BS EN 60534-3-3-1998 | 工业过程控制阀.尺寸.对接焊接,两向,球型,垂直模式控制阀的末端对末端尺寸 | (Industrial-process control valves - Dimensions - End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves) |
| BS EN 60534-2-1-1999 | 工业过程控制阀 .流容.安装条件下液流规模方程 | (Industrial-process control valves - Flow capacity - Flow capacity - Sizing equations for fluid flow under installed conditions) |
| BS ISO 6263-1997 | 液压传动.补偿式流量控制阀.装配面 | (Hydraulic fluid power - Compensated flow-control valves - Mounting surfaces) |
| BS ISO 10770-2-1998 | 液压传动.电模式液压控制阀.第2部分:三向流动控制阀的试验方法 | (Hydraulic fluid power - Electrically modulated hydraulic control valves - Test methods for three-way directional flow control valves) |
| BS ISO 10770-1-1998 | 液压传动.电模式液压控制阀.第1部分:四向流动控制阀的试验方法 | (Hydraulic fluid power - Electrically modulated hydraulic control valves - Test methods for four-way directional flow control valves) |
| BS EN 60534-6-1-1998 | 工业过程控制阀 .控制阀调节器连接用安装元件.直线传动装置上调节器的安装 | (Industrial-process control valves - Mounting details for attachment of positioners to control valves - Positioner mounting on linear actuators) |
| BS ISO 7790-1998 | 液压传动.规格为03和05型的四油口标准设计叠阀和四油口定向控制阀.紧固尺寸 | (Hydraulic fluid power - Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05 - Clamping dimensions) |
